This is the 1/10 scale electric powered, radio controlled, ready to run
                         Tamiya Raybrig HSV-010

FEATURES: Chassis: TT-01 type E, new A parts (Uprights) made of polycarbonate
            plastic material, new D parts (upper deck, motor cover and more)
            made of fiberglass-reinforced nylon material
          Drive: Four wheel shaft drive
          Motor: 540 size with pre-attached leads
          Radio: Tamiya Finespec FM 27MHz pistol-grip with servo reverse,
            steering and throttle trims and standard servo
          Electronic Speed Control: Tamiya TEU-104BK, TAMM4541
          Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights,
            see COMMENTS
          Shocks: Friction, not oil-filled, composite body
          Gearbox: Sealed front and rear
          Differentials: Bevel gear
          Transmission: Single speed
          Tires: Slick radial type 1.02" (26mm), 2.6" (66mm) diameter
          Wheels: Black color six spoke 1.02" (26mm) wide, 2.04" (52mm)
            diameter
          Body: Lightweight polycarbonate painted blue with mirrors, rear wing
            and body trim and sponsor decals applied
          Bumpers: Foam front bumper
          Suspension: Four wheel independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the
            angle of the front suspension when viewed from the side of the car
            in relation to the chassis
          Steering: Bell-crank TA-05 type with servo saver
          Servo Saver: Included

INCLUDES: Tamiya Raybrig HSV-010 on-road rally car, shocks, 540 motor, ESC
            painted body, tires, foam bumper, wheels, 19 tooth pinion gear, 61
            tooth spur gear, instructions, LED light unit, 2-ch radio, rear
            wing and body trim decals

REQUIRES: Battery: 6 cell stick pack with standard connector
          AA Batteries: Eight for transmitter
          Charger: AC/DC Timed or Peak for 6-cell battery

SPECS:      VEHICLE-
          Length: 17.5"  (444mm)
          Width:   7.4"  (188mm)
          Height:  5.2"  (132mm)
          Weight: 2.4lbs (1100g)
          Wheelbase: 9.9" (251mm)
            BODY-
          Length: 17.4"  (442mm)
          Width:   7.5"  (190mm)
          Height:  4.1"  (105mm)

COMMENTS: The TLU-02 Light Control Unit (not included) can be installed for
            more light effects, order TAMC1477.

          For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty. Bearing Set
            12   5x11mm   front & rear diff gears, hubs     6 DTXC1547
             4   8X12mm   front & rear diff gears           2 DTXC1597

                                                                   jxs 12/22/11
                                                                         ir/jxs