This is the electric powered, radio controlled, almost ready to fly
                 Falcon Trainer Airplane from Great Planes.
  This airplane is part of the Carl Goldberg Classics Series by Great Planes.

FEATURES: Construction: Pro-Formance foam
          Wings: One-piece with wing doubler that allows outdoor flying on calm
            days
          Aileron Control: Single servo
          Radio Compartment: Plywood, accessible under wing
          Canopy: Single, clear
          Landing Gear: Prebent wire, tricycle type
          Wheels: Three foam 1.5" (38mm) diameter
          Motor Mount: Wooden firewall
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            date of purchase. This warranty does not cover any component parts
            damaged by use or modification.

INCLUDES: Pre-built wings, fuselage and tail assemblies, pushrods, landing gear
            three wheels, motor mount, decals and illustrated instruction
            manual

REQUIRES: Radio: At least 4 channel
          Servos: Three micro
          Motor: Outrunner brushless, Rimfire 250, GPMG4502 recommended
          ESC: Great Planes ElectriFly SS-8 8 Amp Brushless ESC if using motor
            listed above
          Battery: 7.4V 300mAh LiPo (GPMP0700)
          Propeller: 8x3.8 (APCQ5000)

SPECS:    Wingspan: 37" (940mm)
          Wing Area: 286 sq in (18.4 sq dm)
          Wing Loading: 4.3 - 5 oz/sq ft (13-15 g/sq dm)
          Length: 30" (760mm)
          Weight: 8.5 - 10oz (240 - 285g)
          Center of Gravity (CG): Place fingers on middle lines on bottom of
            wing and and mark recommended starting balance point, CG can be
            shifted 3/8" (10mm) forward or backward to change the flying
            characteristics
          Control Throws:              Low Rate             High Rate
            Elevator: Up            1/2" (13mm) 13°     3/4" (19mm) 28°
                      Down          3/8" (10mm) 14°     5/8" (16mm) 23°
            Rudder                  1"   (25mm) 23°   1-1/2" (38mm) 35°
            Ailerons Up             3/8" (10mm) 17°     1/2" (13mm) 24°
                     Down           1/4" (6mm)  12°     3/8" (10mm) 17°

                                                                   jxs 12/14/10
                                                                   jml 02.24.11
                                                                         ir/jxs