This is the radio controlled, electric powered, 1/10 scale
               SC10 4x4 Short Course Racing Kit from Associated.

    **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Composite modular construction with low CG and Low Polar
            Moment Design
          Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system
            with external tension adjustment, CVAs with captured drive pins
            and heavy duty 6mm alloy axles
          Slipper Clutch: Decoupled design allows front and rear wheels to slip
            independently for greater traction and stability under bumpy
            conditions
          Differentials: Sealed, fluid filled, 32 pitch planetary gears
          Shocks: Oil-filled aluminum body 13mm big bore with low friction X-
            ring seals
          Body: Clear, short course design
          Receiver Box: Sealed, water resistant
          Steering: Ball bearing with adjustable steering stops
          Wheels: 12mm hex drive KMC replica
          Tires:
          Caster: Adjustable, caster/toe-in refers to the angle of the
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: SC10 4x4 Short Course Racing Kit with Tires, Wheels, Clear Body,
            Decals and Instruction Manual

REQUIRES: Radio: 2-channel with high-torque steering servo
          Motor: 540 or 550 size, brushless recommended
          Pinion Gear:
          ESC: Compatible with selected motor
          Battery: 6-cell NiMH or 2-cell LiPo
          Battery Charger: To match selected battery
          Building and track equipment

SPECS:      Vehicle-
          Length: 21.6" (550mm)
          Width:  11.5" (293mm)
          Weight: 6.1lbs (2775g) weight will vary slightly depending on
            electronics used
          Wheelbase: 12.9" (327mm)
          Internal Gear Ratio: 2.57:1
            Body-
          Length:
          Width:
          Height:

COMMENTS: For Replacement Ball Bearings use:
            Qty.   Size         Location                   Qty.  Bearing Set

                                                                   jxs 01/31/11