This is the electric powered, radio controlled, 1/8 scale
   RC8.2E Factory Team Off-Road Competition Buggy Kit from Team Associated.

FEATURES: Chassis: 7075 hard anodized aluminum 0.14" (3.5mm) thick,
            lengthened 3mm from original chassis, molded composite front and
            rear chassis braces and radio tray
          Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center
            drives, 3.5mm light CVA drivetrain with full ball bearings
          Motor Mount: Factory Team sliding design, aluminum construction, blue
            in color
          Body: JConcepts clear Punisher Body and black plastic Illuzion wing
          Differentials: Planetary gear
          Shocks: Factory Team 16mm Big Bore hard anodized with 4mm titanium
            nitride coated shafts, steel alloy shock standoffs and 30wt
            silicone shock oil
          Shock Towers: Factory Team 0.20" (5mm) 7075 aluminum low-center-of-
            gravity
          Suspension: Factory Team 7075 blue aluminum mounts with new arms that
            feature centerline shock mounts and optimized anti-roll bar
            position
          Steering: Factory Team 7075 blue aluminum steering knuckles
          Ball Bearings: Full set included
          Wheels: Dish type, white in color 17mm hex, 1.6" (49mm) wide, 3.3"
            (83mm) diameter
          Caster: Adjustable with caster blocks that adjust 14, 16, or 18° with
            molded inserts, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
           tires from vertical when viewed from front or behind vehicle

INCLUDES: RC8.2E Factory Team Off-Road Buggy Kit with Wheels, Shock Oil, clear
            Body, Rear Wing, Decals and Instruction Manual

REQUIRES: Radio: 2-channel with high torque steering servo
          Motor and ESC: Brushless system for 1/8 scale buggy
          Tires: 1/8 scale buggy
          Battery: 2S-4S 7.4V LiPo pack
          Battery Charger: LiPo compatible
          Polycarbonate safe paint, building and track equipment

SPECS:      Vehicle;
          Length: 18.5" (470mm)
          Width:  12"   (305mm)
          Wheelbase: 12.7" (323mm)
          Internal Gear Ratio: 4.30:1
          Weight: 7.9lbs (3570g)
            Body;
          Length: 14.6" (370mm)
          Width:   7.9" (200mm)
          Height:  4.4" (112mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2   8x16mm    Front Diff                  1    DTXC1585
             2   8x16mm    Center Diff                 1    DTXC1585
             2   8x16mm    Rear Diff                   1    DTXC1585
             2   8x16mm    Front Hubs                  1    DTXC1585
             2   15x21mm   Front Hubs                  1    DTXC1601
             2   8x16mm    Rear Bulkhead               1    DTXC1585
             2   8x16mm    Rear Hubs                   1    DTXC1585
             2   15x21mm   Rear Hubs                   1    DTXC1601

                                                                   jxs 10/25/11
                                                                         ir/jxs