This is the Airtronics M12 2.4GHz FH4T Competition 4-Channel Radio System
                   with the RX-471 Super Response Receiver.

FEATURES: Telemetry capable system is equipped with a 4x higher spec CPU than
            the Airtronics M11X
          Supports Telemetry and PC Link functions (NOTE, Airtronics RX-461
            (AIRL1912) receiver, or RX-462 receiver required for full
            telemetry capability)
          LCD display: 128 × 256 full dot LCD display with smooth scrolling
          PC Link uses mini USB connector, no special cord required
          Five Racing Modes allow user to change programming settings with a
            single touch for different track and setup conditions
          Receiver Mode displays telemetry data from other Airtronics
            transmitters
          Ten car type templates including three crawler setups
          MOA MIX allows dig and burn control when using dual motors
          4WS MIX allows front, rear, parallel and tandem steering when using
            dual steering servos
          Five racing modes allow setup changes on the fly while driving
          50 model memory with Direct Model Select up to 3 models
          Programmable push-button switches, trim switches, lever and dial
          All channel fail safe support on receiver
          Adjustable steering and throttle channel response time
          Exponential, ARC and curve adjustments
          Lap timer and two interval timers
          Normal, SSR and SHR servo modes
          Selectable throttle bias
          Dry cell battery holder or use with NiMH or 2S LiPo cells
          One year limited warranty through Airtronics beginning at date of
            purchase

INCLUDES: Airtronics M12 2.4GHz FH4T Radio System with RX-471 Receiver, On/Off
            Switch, Large and Small Rubber Grips, Larger Diameter Steering
            Wheel, Right and Left Steering Wheel Angle Plates, Offset Plate,
            Soft and Hard Steering Wheel Springs, Thin and Thick Throttle Angle
            Brackets, and Instruction Manual

REQUIRES: Servos of modeler' choice, digital servos recommended for fastest
            performance
          AA Batteries: Four for transmitter

SPECS:      Transmitter;
          Output Power: 100mW
          Nominal Input Voltage: 4.8-7.4V
          Operating Voltage Range: 4.0-9.0V
          Dry Weight: 20.8oz (590g)
          Frequency: 2.4GHz FHSS
          Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT (user selectable)
            Receiver;
          Nominal Input Voltage: 4.8-7.4V
          Weight: 0.23oz (6.6g)
          Dimensions: 1.18 x 0.91 x 0.55" (30.0 x 23.3 x 14.0mm)
          Frequency: 2.4GHz FH3/FH4 selectable via transmitter
          Fail-Safe Support: Yes (all channels)
          Battery Voltage Fail-Safe Limit: 3.5-5.0v (FH3) / 3.5-7.4v (FH4)

                                                                   jxs 10/10/12
                                                                         ir/jxs