This is the radio controlled, electric powered
                    Dumas Dehavilland DH-89 kit

FEATURES: Construction: Hand selected laser cut balsa
          Vacuum molded nose cone, windshield, engine cowls, nacelles and
            wheel pants
          Rudder Control: Pull-pull cables
          Aileron Control: Flexible control cables
          Elevator Control: Wire pushrod
          Servo Placement: Mounted in rails on fuselage
          Scale Rigging: Functional flying wires and tail braces

INCLUDES: All balsa, lightweight colored (gray) tissue covering
            two 2" (50.8mm) lightweight foam main wheels, CA hinges, rigging
            wire, control cables, instruction manual, three full-size plan
            sheets, acetate sheets for windows, and all hardware
            to complete this kit

REQUIRES: Two GWS IPS (GWSG2021) motors (3.5:1 gear ratio)
          3 channel radio system (minimum)
          4 micro servos
          One 25A ESC w/BEC for brushed motors (GPMM2025)
          2 cell 1200mAh LiPo battery (GPMP0835)
          GWS 7x6 props, (GWSQ2015)
          Building and field equipment

SPECS:    Wingspan: 42" (1066mm)
          Center of Gravity (CG): 1 5/8" (41.2mm) aft of the upper wing leading
            edge at the root
          Control Throws-
            Ailerons, Up and Down: 1/2" (12.7mm)
            Elevator, Up and Down: 5/8" (15.9mm)
            Rudder, Left and Right: 1" (25.4mm)

Comments: Motors are hardwired/soldered to speed control

                                                                  jml 12/18/08
                                                                   OA  4/29/08
                                                                         ir/jxs