This is the radio controlled, 1/8 scale, electric powered, ready to run
iRock Rock Crawler from Team Integy.
For 14 years of ages and older
FEATURES: Chassis: Twin Vertical Plate (TVP) anodized blue aluminum 0.12"
(3mm) thick
Drive: Four wheel
Motors: Two 540 size
Radio: 2.4GHz with special four wheel steering functions and two
high-torque steering servos
Electronic Speed Control: Dual motor and reverse capable, cooling fan
equipped
Battery: 2000mAh 7.2V NiMH stick pack with Tamiya type connector
Battery Charger: 110VAC slow charger
Shocks: Four oil-filled with threaded aluminum bodies for a wide
range of damping control
Differential: Locked spool type
Body: Painted and trimmed
Pinion Gears: Two 12 tooth
Steering: Four wheel, direct linkage from servo
Wheels: 40 size beadlock, 23mm hex, 3.7" (93mm) diameter, 3.2"
(82mm) wide, green aluminum beadlock rings
Tires: Knobby, off-road pre-mounted 7.2" (182mm) diameter, 3.3"
(83mm) wide
INCLUDES: iRock Rock Crawler RTR with two 540 motors, 2.4GHz radio
w/heavy duty steering servos, ESC, battery, battery charger,
painted body and instruction manual
REQUIRES: AA Batteries: Eight for transmitter
Building and track equipment
SPECS: Vehicle-
Length: 25.4" (645mm)
Width: 14.8" (375mm)
Height: 8.8" (225mm) not including body
Wheelbase: 18.1"(460mm)
Gear Ratio: 1.48:15
Weight: 11.7lbs (5300g)
Body-
Length: 18.5" (470mm)
Width: 8.1" (206mm)
Height: 5.7" (145mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x12mm Front Gearbox 1 DTXC1569
2 6x12mm Rear Gearbox 1 DTXC1569
4 8x16mm Front Uprights 2 DTXC1585
2 12x18mm Front Axles 1 DTXC1597
4 8x16mm Rear Uprights 2 DTXC1585
2 12x18mm Rear Axles 1 DTXC1597
jxs 11/17/09
ir/jxs
|