Made of 3/8" and 1/4" plywood
Easy to assemble with pictures and instructions
Shorter height lets the caddy fit more easily into your vehicle
Divided drawer with Velcro "lock" safely stores tools and gear
Fuel shelf's corner braces and plastic belts hold your gallon can
or jug securely in place while on the move.
Accepts nearly any Power Panel-or you can install Hobbico's Quick
Field Charger MkII (HCAP0290) instead to create a handy Field
All wood that is required
All screws, nuts, knob for drawer, plastic strapping and Velcro
Height: 13" (when fully assembled)
Battery Compartment Dimensions: 7-1/2 x 3-1/4 x 4-3/4"
(190 x 82 x 121mm)
Med Thick CA glue CA Accelerator Spray
Sand paper Drill and bits (5/64", 1/8", and 3/16")
Screw Driver Modeling knife
Masking Tape Scissors
Paint (Epoxy or polyurethane)
This does NOT come with the Hobbico decal as shown in the catalog
Hole for the Power Panel is intentionally undersize to accomodate
many different panels. Modeler must trim to size.
updt jxs 11/17/14