This is a Ball Differential Set used in the Traxxas Nitro Pro 4-Tec.
Blue anodized output shafts
One 34 tooth pulley
One left output shaft
One right output shaft
Two 5x8mm ball bearings
Two diff rings
Twelve 1/8 hardened carbide diff balls
One thrust washer retainer
Two thrust washers
One thrust bearing
Four belleville spring washers
One diff shaft screw
Three lock washers
Three 2x5mm caphead machine screws
One tube of diff ball grease
One tube of thrust bearing grease
One instruction sheet
Solvent for using pre-applied rust prohibitor.
Assembly and installation into Nitro 4-Tec.
Pulley tooth outer diameter: 31.5mm (1.24") Number of pulley teeth: 34
– If you need more information, use these Traxxas resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.