Tamiya 1/12 XB Midnight Pumpkin Metallic Special RTR

Tower Stock# LXMFV5  •  Manufacturer Stock# 57752
Tamiya 1/12 XB Midnight Pumpkin Metallic Special RTR (large view)
Notes from our tech department:
This is the 1/12 scale, electric powered, radio controlled, Ready To Run
Tamiya Metallic Midnight Special On-Road Truck.
This version of the Midnight Special is part of
Tamiya's XB (expert built) series.

FEATURES

Chassis: ABS plastic box type with metal wheelie bar
Drive: Rear wheel
Motor: 540 size
Radio System: Tamiya Expec 27MHz AM pistol grip with steering and
throttle trim and reverse and steering servo
Electronic Speed Control: Tamiya TEU-101BK with reverse
Body: 1950's pickup style PS injection molded with vacuum plated
metallic finish and pre-applied decals
Shocks: Four plastic bodied friction (not oil filled) type
Gearbox: Sealed
Transmission: Single-speed
Differential: Planetary
Tires: 4.5" (115mm) diameter, 2.7" (69mm) wide monster truck type
Wheels: 2" (51mm) diameter, 2.5" (64mm) wide chrome plated plastic
Bumpers: Front plastic
Camber Tie Rods: Fixed, non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis

INCLUDES

Tamiya Midnight Pumpkin Metallic Special kit with shocks, 540 motor,
Electronic Speed Control, radio, body, tires, decals, wheelie bar
32 pitch 17 tooth and 50 tooth spur gear, instructions

REQUIREMENTS

AA Batteries: Eight AA size for trasnsmitter
Battery: 6-cell 7.2V stick pack
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 15.25" (387mm)
Width: 11.1" (282mm)
Height: 10.7" (271mm)
Weight: 3.8 lbs (1725g) without battery
Wheelbase: 8.25" (209mm)
Front Tread: 8.8" (223mm)
Rear Tread: 8.5" (216mm) measured at wheel centers
Front Track: 10.3" (262mm)
Rear Track: 10" (255mm) measured at outer edges of wheels
Ground Clearance: 2.25" (57mm)
Gear Ratio: 14.7:1
Tires: 4.5" x 2.7" (115mm x 69mm)
BODY-
Length: 14" (359mm)
Width: 7.8" (198mm)
Height: 4.9" (109mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Rear Wheel Shafts 2 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547

jxs 2/28/06
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐