This is the #602 Mechanical Nose Gear Retracts for .15-.40 Gas/Electric|
Powered Models Weighing 2-5 pounds.
Positive Up and Down Locks
Tough Glass-filled Nylon Construction
1/8" Tempered Steel Gear Legs
Mechanically Operated with Standard Servos
4- Mounting Screws
1- Mechanical Retract
1- Set of Instructions
Modifications to aircraft to mount system
One servo to operate retract
Length Closed: 7-1/2"(190.50mm) Length Open: 7-5/16"(185.67mm)
Width of Base is 1-3/8"(34.80mm) X 1-7/16"(36.58mm)
Control arm travels approx. 5/8"(16mm) for operation
Depending on the aircraft you can connect to your rudder servo for
steering operation or use a seperate servo.
This retractable gear requires a clevis or z-bend to actuate arm.