This is the optional Rear Center CV Drive shaft from|
Duratrax for use on the Warhead monster truck.
This replaces the stock dogbone and joint going from the center transmission
to the rear of the vehicle.
Optional replacement parts
Helps to improve power distribution
One rear center CV drive shaft
One rear center CV drive joint
One CV pivot
One 1.9x18mm roll pin
4x4mm set screw(DTXQ0305)
Assembly and installation onto vehicle
2mm hex wrench
Diameter of ball that goes into joint:8mm
This replaces the stock dogbone (key #3) and the joint (key #127).
One will need to use the stock 4mm screw pin when installing.