This Servo is a Hitec Mega 1/4 Scale Servo with a|
Universal Futaba J, Hitec S, JR and Airtronics Z Connector.
Dual Ball Bearings
Hitec Custom IC
Water Resistant Case (not water-proof)
One Set Heavy Duty Horns (X, Single arm, Circle horns) and Hardware.
Size: 2.6"x 1.2"x 2.3" (66 x 30 x 58 mm)
Weight: 159g (5.6oz)
8mA idle and 800mA at zero-load operation
Speed: 0.14 sec. at 60° w/ 6.0V battery.
Output Torque: 16.0 kg-cm (224 oz-in) at 4.8V.
High capacity receiver battery (at least 1200mAh).
Warning: If used with an electric powered vehicle, do not use
the BEC. The excessive power drain may damage the receiver or
the Electronic Speed Control.
For replacement Gear Set, order HRCM6350.
For replacement Horns and Mounting Hardware, order HRCM6318.