This is a universal mount designed to accept almost any micro servo. It fits
into a 2 inch diameter, by 9/16" deep hole in skinned foam wings. The top of
the mount features an aerodynamic fairing designed to streamline airflow around
the servo linkage.
Great way to easily mount servos in foam wings
Flush mount maintains aerodynamics
Top mounts with three countersunk screws to prevent an
aerodynamically "dirty" situation
Molded in red plastic (easily paintable)
Two servo mounts (two bottom portions, and two tops (one inboard and
one outboard)(the inboard/outboard refers to
which side the fairing is on)
Six countersunk screws (three per mount)
Adapter kit for several different servos
Short set of instructions on back of package
Height of fairing-9/16"
Mount is to glue into foam with epoxy
Servo adapters included are for the 94501, 341, S143, 85BB, but will
probably fit many others including the S133
– If you need more information, use these Hitec resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.