This is a E-Collet Adapter Kit from Tru-Turn.
This one adapts a 6mm collet to a 5/16-24 threaded shaft.
Allows the use of the Tru-Turn standard spinners with electric motors
with 6mm shafts
6mm collet to 5/16-24 threaded shaft
This adapter is compatible with Any Prop that is the "Designed" to
run on a 6.0mm Shaft Motor
Direct contact type collet mechanisim helps to eliminate "run out"
experienced with set screw type adapters
This kit also includes an optional plastic spacer for running any
type of APC "E" props with negative offset
One 6mm to 5/16-24 tapered shaft collet
One backplate bushing
One plastic spacer for offset electric props
One prop nut and washer
One spinner cone bushing
One 3x38mm cap head screw
One 3x52mm cap head screw
Electric motor with 6mm smooth shaft
Length of shaft collet:1.43"(36.56mm) Inner diameter of plastic bushing,prop washer:8mm Weight:.47oz(13g)approximately
Instructions are listed on the back of the header card.
– If you need more information, use these Tru Turn resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.