Great scale look
Constructed from durable 'glass filled nylon
Greater thrust at lower RPM
One 15x7 'Glass Filled Nylon 3-Blade Propeller.
Center Hole Bore: 1/4" (6.5mm)
Diameter: 15" (381mm)
The general rule for converting a 2 blade prop to a 3 blade is
subtract 1" from diameter OR subtract 1 from the pitch.
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
factory prior to drilling. The mounting holes are then drilled slightly off
center, if required, to properly balance the propeller. As such, your mounting
hole may be slightly off center. Master Airscrew assures us this is perfectly
normal and will not cause any problems during usage.