Dumas Pacer Kit 40"

Tower Stock# LXNHY5  •  Manufacturer Stock# 1811
Dumas Pacer Kit 40
Notes from our tech department:
This is the radio controlled, electric powered
Dumas Piper PA-20 Pacer Park Flyer Kit.

FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending

INCLUDES

All balsa, lightweight colored (black, white and red) tissue covering
two 1-3/4" (45mm) lightweight foam main wheels, one 3/4" (19mm)
lightweight plastic tail wheel, CA hinges and all hardware to
complete this kit, instruction manual, two full-size plan sheets,
acetate sheet for windows

REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 9x7 prop, GWSQ2019
Building and field equipment

SPECIFICATIONS

Length: 27" (686mm)
Wingspan: 40" (1016mm)
Wing Area: 272 sq.in. (17.57 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the
wing at the fuselage side
Control Throws-
Elevator, Up and Down: 9/16" (14mm)
Rudder, Left and Right: 15/16" (23.5mm)

rmb 9-21-06
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐