These are 1/2" Offset Beadlocks from Maximizer Products Inc.
FEATURES: Black in Color
12 Spoke Design
The Beadlock System allows you to change tires without using glue.
The Bead of the tire is locked in place by the black inner rings.
INCLUDES: (2) 1/2" Offset Beadlock Wheels
(16) 3x17mm Machine Cap Head Screws
(1) Instruction Sheet
(1) Maximizer Products Inc. Decal
SPECS: Outside Diameter: 3.2" (81mm)
Inside Diameter: 3.04" (77mm)
Width: 2.17" (55mm)
COMMENTS: Maximizer's beadlocks now come with New Rings. They are lighter,
stiffer and more universal. No need to purchase Rage Rings for use
with thin bead tires. Simply insert ring shims on the inner lip of
rings to accomodate thin bead tires such as:
ProLine: Crimefighter, Bow Tie, Mulcher, Paddle and Road Rage
Imex: Swamp, claw, Dirt, Rib, Road, Pin and Trail Dawg
HPI: Dirt Bonz and Claw
The 1/2" offset wheels are offset by one inch when measuring from the front to
the back of the faceplate. However, the zero offsets are actually 1/2" when
measured from front to back. All wheels have a slight offset so the half inch
is similar to what comes stock on any wheel. Therefor the difference between
the two is 1/2".
updated jpg 10/18/06
updated jpg 10/25/06