Dumas DH-4 Park Flyer Kit 35"

Tower Stock# LXPCA5  •  Manufacturer Stock# 1812
Dumas DH-4 Park Flyer Kit 35
Notes from our tech department:
This is the radio controlled, electric powered
Dumas DH-4 Park Flyer Kit.

FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending

INCLUDES

All balsa, lightweight colored (blue and yellow) tissue covering,
two 2" (51mm) diameter plastic main wheels, tail wire skid,
CA hinges and all hardware to comlete the kit, instruction manual,
two full-size plan sheets, and vacuum molded cowling.

REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment

SPECIFICATIONS

Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 329sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge
of the TOP wing
Control Throws-
Elevator, Up and Down: 5/8" (11mm)
Rudder, Left and Right: 3/4" (20mm)

kpm02/15/2007
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐