This is the Replacement Whell Shaft for the
DuraTrax Axis and Nitroquake Kits.
FEATURES: Wheel Shaft
INCLUDES: One wheel shaft for the LEFT SIDE/RIGHT SIDE (number 36 on parts list
SPECS: Overall length: 1-9/16" (40mm)
COMMENTS: Please Note: As modeler is about to put on the DRIVE HUB
number (25) on the parts list
make sure that the FLAT SIDE of the WHEEL SHAFT IS IN LINE
WITH THE SET SCREW ON THE DRIVE HUB. IF IS ISN'T, THE SET SCREW
WILL NOT HOLD. ALSO USE PRO THREAD LOCKING COMPOUND (GPMR6060)
ON THE SCREWS BEFORE YOU REPLACE THEM.