APC 18.1x10W Pattern Propeller

Tower Stock# LXRCJ5  •  Manufacturer Stock# LP18110W
APC 18.1x10W Pattern Propeller (large view)
Notes from our tech department:
This is an 18.1x10W Composite Pattern Propeller from APC.


APC props are manufactured using a pultrusion process. This method
causes the fiberglass "fibers" to be oriented axially in 1/2" long
pellets, allowing for a higher fiber (60%) to resin (nylon binder)
density. Providing substantially higher strength and stiffness than
glass filled nylon.
The additional stiffness is beneficial to control of vibration
resonance response
The higher strength allows the use of thinner cross-sections,
beneficial to weight and aerodynamic efficiency
Competition proven
Single piece propeller


18.1x10W Composite Pattern Propeller


ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)


Prop Diameter: 18.1"
Prop Pitch: 10
Hub Thickness: 0.83" (21mm)
Weight: 4.9oz (140g)
Hole Diameter: 5/16" (8mm)

jxs 03/13/07
updt jxs 10/09/08
updt jml 12/18/08

‐ Mailing Address ‐
‐ Additional Contact Information ‐