This is a set of two Robart 630RS Robostrut Ready 85° Retracts
      for planes up to 24lbs (10.9kg). These are for the Main Gear only.

FEATURES: Constructed with heat treated aluminum alloy frames and trunions,
            these gear are furnished with 1/2" dia. 4130 alloy steel tubular
            RoboStruts
          They offer long dependable service for large aircraft flying off
            grass or paved runways
          Powered by a 1/2" bore triple sealed Robart air cylinder and feature
            positive up and down locks
          Easily adjusted for toe-in with the unique Robart "split-lock"
          trunion. Available in standard 90°, 85° Main Gear, and 90°, 100°,
          105°, and 110° Nose Gear retract angles, with straight or offset
           struts

INCLUDES: Two retracts with pressure cylinders
          One instruction sheet

REQUIRES: Installation of air system

SPECS:    Length: 4.5" (114.3mm) total length
          Width:  2" (50.8mm) at the mounts
          Height: 1.37" (35mm) total from bottom of mounts to top of unit

COMMENTS: For use with any 7/16" or 1/2" diameter Robostrut

                                                                    tlw 6/22/07
                                                                         ir/jxs