Venom LiPo 2S 7.4V 1600mAh 10C Flat Receiver

Tower Stock# LXSFS6  •  Manufacturer Stock# 1559
Venom LiPo 2S 7.4V 1600mAh 10C Flat Receiver (large view)
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the 10c 2s 7.4V 1600mAh Lithium Polymer Receiver
Battery Pack from Venom Aircorps.

FEATURES

Balance plug for checking individual cell voltages and balancing

INCLUDES

1600mAh Lithium Polymer Receiver Battery Pack

REQUIREMENTS

Lipo Charger

SPECIFICATIONS

Length: 3.3" (84mm) Charge Rate: 4.8A (3C)
Width: 1.1" (31mm) Discharge Rate: 16A
Thickness: 0.63" (16mm) Max Volts Per Cell: 4.2V
Weight: 2.8oz (80g) with wires Max Pack Voltage: 8.4V
Max Discharge Volts: 6.0V

COMMENTS

ALWAYS use a LiPo-approved charger
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER allow to Discharge below 3.0V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts (if using
aftermarket charger)
ALWAYS keep out of reach of children

jxs 12/07/07
ir/jxs

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐