This is the Team Integy 25C 2200mAh 11.1V Lithium Polymer Battery Pack.
These batteries must be Charged ONLY with a charger
designed to Charge Lithium Polymer batteries which can apply
the "Constant Current/Constant Voltage" (CC/CV) Charge technique.
FEATURES: Next generation replacement for NiCd, NiMH and Lithium Ion batteries
Unique power technology offers high energy density, low weight, long
life, safe operation, and environmentally friendly chemistry
INCLUDES: Team Integy 25C 2200mAh 11.1V Lithium Polymer Battery Pack with 14
AWG wire with Red 2-Pin Connector and White 4-Pin Balancing
REQUIRES: LiPo compatible charger and balancer
LiPo charging bag
SPECS: Length: 4.4" (112mm)
Width: 1.4" (35mm)
Thickness: 0.94" (24mm)
COMMENTS: NEVER Charge Lithium Polymer batteries with a charger designed for
NiCd, NiMH, or any other type of battery chemistry. Use ONLY
the chargers listed under REQUIRES or equivalent substitutes.
Never Charge with more than 1C rate
Do not Charge at more than 4.2V per cell
Do not allow LiPo cells to overheat at any time. Cells which reach
greater than 140°F (60°C) will usually become damaged and
could catch fire.
Do not Charge or Discharge LiPo cells on or near combustible
materials including paper, plastic, carpets, vinyl, leather, wood,
inside an R/C model or full size automobile.
Do not expose LiPo cells to water or moisture at any time.
Do not store batteries near an open flame or heater.
Do not assemble LiPo cells or pre-assembled packs together with
other LiPo cells or packs.
Do not leave LiPo battery unattended during Charging or Discharging
Always store LiPo batteries in a secure location away from children
Always remove a LiPo battery if model is involved in any kind of
crash. Carefully inspect the battery and connectors for even the
smallest damage. CAUTION: cells may be hot! Do not allow the
electrolyte to get into eyes or on skin. Wash affected areas
immediately if they come into contact with electrolyte.
Do not alter or modify connectors or wires of a Lithium battery pack.