Tamiya Baldre DB01 Kit

Tower Stock# LXULS0  •  Manufacturer Stock# 58404
Tamiya Baldre DB01 Kit (large view)
Notes from our tech department:
This is the 1/10 scale electric powered, radio controlled,
Tamiya DB01 Baldre Off Road Buggy Kit.


Chassis: DB01 plastic chassis with integrated bulkheads for
simplified maintenance, chassis also locates heavy components near
the center for optimum weight distribution
Drive: Four wheel two belt drive, tension adjustable enclosed with
ABS resin covers to protect from dirt
Motor: 540 motor with pre-attached leads
Ball Bearings: Full set included
Shocks: Four oil filled CVA plastic body
Gearboxes: Enclosed, front and rear
Differentials: Ball type
Transmission: Single speed
Rear: 1.6" (41mm) wide, 3.3" (83mm) outer diameter
Front: 1.2" (32mm) wide, 3.3" (83mm) outer diameter
Inner Diameter 2.2" (56mm)
Wheels: One-piece dish type
Body: Lightweight polycarbonate Baldre buggy with rear wing
Suspension: Four wheel independent double wishbone with same
configuration as the Tamiya TRF501X chassis
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank with servo saver


DB01 rolling chassis with oil filled shocks, 540 motor, Baldre clear
buggy body, spike tires, foam inserts, dish wheels, CVA oil-filled
shocks, 17 tooth pinion gear, 91 tooth spur gear, rear wing,
decal sheet and instructions


Radio: 2-channel with 1 standard servo and Electronic Speed Control
Radio Batteries: 8 AA size
Battery: 6 flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Paint: Spray or brush-on for polycarbonate body
Misc. Items: Building and track equipment


Length: 15.5" (395mm)
Width: 9.8" (248mm)
Height: 6.2" (157mm)
Weight: 2.4lbs (1075g)
Length: 11.25" (287mm)
Width: 6.12" (150mm)
Height: 3.0" (72mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
2 10 x 15mm Front Ball Diff 2 DTXC1595
2 10 x 15mm Rear Ball Diff 1 DTXC1595
2 5 x 8mm Front Ball Diff 2 DTXC1523
2 5 x 8mm Rear Ball Diff 2 DTXC1523
2 4 x 8mm Center Pulley 1 DTXC1511
2 5 x 10mm Front Axles 1 DTXC1535
2 5 x 10mm Rear Axles 1 DTXC1535
4 5 x 8mm Steering Arms 2 DTXC1523

jxs 4/11/08
jml 6/5/08

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐