These are .40 size Non-Rotating Mechanical Retracts from Great Planes.
Ideal for .40 size glow powered aircraft.
88°degrees of movement compensates for 0° to 2° wing dihedral
Aerodynamic low-profile design
Positive up and down locking positions
Fiber-reinforced, Dark Blue injection-molded nylon housing for
Chromed metal struts with two shock absorbing coils
Pre-assembled strut and housing for easy installation
Comes packaged in a hangable clear plastic rectangular box with
wheel mounting diagram and actual size mounting template.
One year quality guarantee
Two mechanical retract assemblies
Four pushnuts (friction washers) for installing wheels
Two adjustable axles
Two cap head screws for mounting axles (M3.2x5)
File a flat spot on the gear strut for mounting axle
Cutting off un-needed strut length
3mm allen head wrench to tighten cap head screws
Clevis', wire pushrods, retract servo, wheels, and mounting hardware
to install and operate retracts.
Strut Length: 6.9" (175mm) (bottom of mounting plate to tip) Strut Diameter: .140" (3.5mm) Net Weight: 1.9 oz (54g) per gear unit Housing Width: .8" (20mm) Housing Height: .95" (24.13mm) Mounting Plate Width: 1.5" (30.5mm) Mounting Plate Length: 1.5" (30.5mm) Mounting Holes Width: 1.2" (30.5mm) (side to side on-center) Mounting Holes Length: 1" (25.4mm) (front to rear on-center) Axle Diameter: 5/32" (3.5mm) Axle Length: 1" (25.4mm)
– If you need more information, use these Great Planes resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.