Midwest MEPS-III Motor System

Tower Stock# LXVG79  •  Manufacturer Stock# 836
Midwest MEPS-III Motor System (large view)
Notes from our tech department:
This is the Midwest MEPS-III Motorizing System.
This system allows the modeler to power the Boothbay Lobster Boat #964,
Cranberry Isle #984 and the Seguin #984 for radio control use.


Speed control with two speeds forward, two speeds reverse and fuse.
12V high torque motor.
Pre-wired and pre-soldered connections.
Double sided tape for attaching speed control to servo.


One Midwest MEPS III Motorizing system with: Motor, two 5W resistors,
2A fuse w/ holder, wiper arm, wiring with (Kyosho-type) connectors
and double sided tape.


Installing in boat (refer to the boat's construction manual for
installing of the motor and radio equipment).
Two six cell flat battery packs with standard connector,
CA glue to connect wiper to servo horn (GPMR6001)


Motor: 12 - 14.4V, 5 pole
RPM: 6500 @ 14.4V
Typical Current Draw: 1.3A
Fuse: 2A
JXS 6/8/01

‐ Mailing Address ‐
‐ Additional Contact Information ‐