This is the Muffler Assembly for the Tower 61 and 75 ABC Engines.

FEATURES: Pre-assembled three section aluminum muffler with natural color end
            sections and polished middle section.
          Bullet shaped with the exhaust outlet directed down at an angle

INCLUDES: One pre-assembled muffler completed with the following:
            One muffler front section     (TOWG4730)
            One muffler middle section    (TOWG4734)
            One muffler rear section      (TOWG4732)
            One muffler assembly screw    (TOWG4765)
            Two assembly nuts             (TOWG4765)
            Two fiber washers             (TOWG4765)
            One pressure nipple           (TOWG4994)

REQUIRES: Muffler mount screws, use TOWG4845
          Muffler gasket, use TOWG4657

SPECS:    Length to end of assembly screw: 175mm
          Outer diameter: 47mm
          Mounting holes on center: 41mm
          Exhaust outlet length:    14mm
          Exhaust outlet inner diameter:  8mm
          Length of manifold to muffler: 32mm
          Manifold exhaust port width (rectangular): 29.5mm
          Manifold exhaust port height: 11mm
          Manifold mounting flange thickness: 8.3mm
                                                                     cmc 1/7/01
                                                                          ir/jl