Astro Flight Servo Tester

Tower Stock# LXVK79  •  Manufacturer Stock# 105
Astro Flight Servo Tester (large view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Astro Model 105 Servo Tester from Astro Flight Inc.


Plastic case
Aluminum face plate
Universal connectors


One servo tester
One instruction sheet


A servo or motor to test


Length: 2-5/8" Leads: 5-1/4" including connectors
Width: 1-5/8"
Height: 5/8" (case) 1-1/4" including dial


With this you can do the following without using your radio:
- Run electric motors
- Test servos
- Know at what receiver pulse width your motor starts
- Know at what receiver pulse width your motor is fully on
- Match your transmitter throttle channel to your speed control

This Servo Tester can be used with or without an external receiver
nicad battery pack. You will find two radio cables on the tester.
The three wire cable goes to your servo or Electronic Speed
Control. If your speed control has a BEC circuit, it will not be
necessary to use a separate 4 cell receiver battery. If your
speed control has no BEC circuit or if your are testing servos,
you will need to use the receiver battery. Connect the receiver
battery to the two wire radio connector.

The Model 105 Servo Tester operating mode allows user to adjust servo
signal from one millisecond (low throttle) to two milliseconds
tjt 041502

‐ Mailing Address ‐
‐ Additional Contact Information ‐