This is the FUTABA S3003 STANDARD entry level Servo w/o Accessories.

        This servo can produce high current draw from your batteries.
        If using NiMH or LiPo batteries, make sure they are capable
                       of delivering sufficient amps.

FEATURES: Lightweight servo for use in cars, boats, or where a basic servo is
            needed.
          Nylon gears
          One year warranty

SPECS:    Speed:     0.23 sec/60° @ 4.8V or .19 sec/60° @ 6V
          Torque:    44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
          Size:      1.59"L x 0.78"W x 1.42"H (40.4x19.8x36mm) w/o output shaft
          Weight:    1.31oz (37.2g)
          Connector: "J" type with approx. 5" lead

INCLUDES: One S3003 standard servo

REQUIRES: Hardware (servo mounting screws, grommet, eyelets, servo horns)
            ,use FUTM3551 for accessory package.
          Radio system using Futaba "J" type connectors.

COMMENTS: inch (millimeters)                        ##      .60(15) flange to
          Side view:    1.42(36)            __¦--------¦__           top of
                        bottom to top         ¦        ¦             shaft
                        of case(not           ¦        ¦    1.0(25)  flange to
                        output shaft)         ¦________¦             bottom of
                                              1.59(40.4)             servo

                                             ¦O¦        ¦O¦
                                                1.90(58)
                                            center-to-center of holes
                                                                     axy9/13/97
                                                                          ir/jl
                                                              updt jxs 10/29/04