This is the Tail Set for the
Great Planes Matt Chapman Eagle 580 EP ARF 50" (GPMA1573).
Balsa and plywood construction
Precovered with Top Flite MonoKote
Stabilizer w/Elevators (key #8)
Rudder (key #11)
One Nylon Control Horn
One Nylon Faslink
Two 2x9.5mm Screws
One Nylon Clevis
One 6" Wire Pushrod
One Elevator Joiner Wire
One Silicone Clevis Retainer
Two Nylon Torque Rod Horn
Two #2 Flat Washers
Two 2-56 Nuts
One 2-56 Threaded Rudder Control Horn Rod
Four 6mm Brass Tubes
Installation on the airplane
– If you need more information, use these Great Planes resources –
Parts Compatibility for Great Planes Tail Set Eagle 580 50" 3D EP ARF
This item is a replacement part for the following:
Great Planes Matt Chapman Eagle 580 EP ARF 50"
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.