This is a 3 oz can of Flat Enamel Primer Spray Paint.
FEATURES: The only "To Scale" miniature railroad enamel paint.
Uses finely ground pigment made especially for models.
Authentically matched colors.
Permanent on all surfaces and safe for most plastics.
Dries to touch in 2 to 5 minutes and requires no baking or curing.
INCLUDES: One can of Flat Enamel Primer Spray Paint
REQUIRES: Floquil Dio-Sol thinner/brush cleaner for clean up.
Lung, eye and skin protection (see COMMENTS).
SPECS: Amount: 3 ounce (85g) net weight
COMMENTS: Directions: -Before using test to determine compatibility with
surface to be sprayed.
-Shake Well.
-Hold can upright 10" to 12" from surface.
-To avoid runs, apply several light coats, allow a few
minutes drying time between applications.
-To clear valve after using, invert can and spray
several seconds. If nozzle clogs, clean with thinner.
Contains: Hydrocarbon Propellants, Petroleum Distillates, Ketones and
Ester Solvent. Keep away from heat, sparks and open flame.
Warning: This product contains a chemical known to the State of
California to cause cancer.
Keep Out Of Reach Of Children.
Vapor Harmful. Causes eye and skin irritation. To avoid breathing
vapors and spray mist, open windows and doors to ensure fresh air
entry during application and drying. If you experience eye
watering, headaches or dizziness, increase fresh air entry or wear
respiratory protection. Use only with adequate ventilation.
In case of eye contact, flush immediately with plenty of water for at
least 15 minutes and get medical attention.
bmb 5/3/01
ir/jl
| 
