This is a Glow Powered, Radio Controlled, Wood Construction,
Pete-N-Poke Sport .40 Nostalgic Airplane.
For Intermediate Modeler/Fliers.
FEATURES: Modeled loosely on the 1920s-era, Model "A" Ford engine powered
Pietenpol Air Camper homebuilt, and the popular Great Planes
Slow Poke. This airplane offers smooth, slow flight with the
potential to perform all basic aerobatics. Even if the plane is in
a stall, it loses very little altitude before quickly recovering.
Easy low-speed flight offers a relaxing change of pace from
demanding sport planes.
Precisely interlocking wood parts and photo-illustrated instructions
Wing attachment at the flying field takes very little time. Simply
plug the decorative struts into pockets built into the fuselage and
wing, and secure the wing to the center cabane structure using
three bolts. The struts are automatically aligned and locked
Long tail moment helps prevent ground loops, even inexperienced
taildragger pilots can quickly master takeoffs and landings.
Separate hatches located on the bottom front of fuselage, allow easy
access to on-board radio gear and the fuel tank.
Dual aileron servos add precision and authority for crisp,
Engine bolts onto a mounting plate with the proper right thrust angle
built-in so no separate mount is required.
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at date
INCLUDES: All the wood to build the kit, 3/16" main landing gear wire, 3/32"
tailgear wire, clear windshield material, photo illustrated
instructions, full-size rolled plans, decals.
REQUIRES: Engine: .40-.46cu in (6.5-7.5cc) 2-stroke w/Standard Muffler
(Note: The 2-stroke mounts in an upright position.)
or .40-.52cu in (6.5-8.5cc) 4-stroke w/Standard Muffler
(Note: The 4-stroke mounts in an upright position.)
Radio: 4 Channels
Servos: 5 standard (1-throttle, 1-elevator, 1-rudder, 2-ailerons)
Servo Extensions 6": 2 for ailerons
Covering: Two 6 foot rolls
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
10oz fuel tank, fuel filter, propeller, 2.5" spinner, 3" main
wheels, 1" tailwheel, 3/16" and 3/32" wheel collars, building and
SPECS: Wingspan: 59.5" (1510mm)
Wing Area: 809.2 sq in (52.2 sq dm)
Weight: 5.75lb (2.6kg)
Length: 47" (1195mm)
Wing Loading: 16.4oz/sq ft (50g/sq dm)
Airfoil: Flat Bottom, High Wing
Center of Gravity: 3-7/8" (98mm) back from the leading edge of the
Control Throws- High Rate Low Rate
Ailerons: Up & Down 1" (25mm) ¾" (19mm)
Elevator: Up & Down 1½" (38mm) ¾" (19mm)
Rudder: Right & Left 1½" (38mm) 1" (25mm)
Engine: 3° right thrust and 3° down thrust
Wing: 1° positive
COMMENTS: Pictured on box with Sapphire Blue and Cream MonoKote trim scheme.
The checkerboard rudder area is Cream MonoKote with Sapphire Blue
squares ironed in place to form the checkerboard pattern.
Decal sheet PNP4D01 sold only through GP Manufacturing includes: JAL 12/7/00
One 15" x 3-1/8" Black EC-02M ir/jl
Two 6" x 1¼" Black EC-02M
Four 2½" x ½" Black, Red and White Great Planes logos
Two 3-3/8" x 1-1/8" instrument panels
Two 7-1/8" x 1-3/4" Red & White Pete 'n Poke logos
Two 7-1/2" x 1/4" Red & White stripes
Two 2-7/8" x 5/8" White & Black Sport 40 logos