HPI Racing Flux Motiv Brushless ESC

Tower Stock# LXWHZ6  •  Manufacturer Stock# 100416
HPI Racing Flux Motiv Brushless ESC (large view)
Notes from our tech department:
This is the Flux Motiv Brushless ESC from HPI Racing.


LiPo programmable low-voltage cutoff
High performance cross-cut aluminum heat sink
Proportional braking for great control off-power
Huge amount of continuous power handling
Smooth startup and run with sensorless motors
Reversing speedo with programmable reverse lock-out for racing
Extremely light weight
Authentic Dean's battery plug for a secure zero-loss connection
Durable on/off switch
Simple initial programming
Ability to easily adjust speedo parameters with HPI link cable


One Flux Motive Brushless ESC


Connecting to motor, battery, and receiver


Input: 6-8 cell NiMH/NiCd or 2 cell Lipo (with 5700Kv motor)
6-12 cell NiMH/NiCd or 2-3 cell Lipo (with 4600Kv or below)
Current: 70A continuous/ 380A burst
Resistance: 0.0007 ohms/phase)
Dimensions: 46 x 36 x 23mm (1.8"L x 1.4"W x 0.9"H)
Weight: 62.4 g (2.2 oz)


When fitted with the Flux Warp 5700 motor or other motors with 5700Kv
of power, you can use up to 7 normal NiMH cells or a 2S LiPo battery.
When fitted with a motor with 4600Kv of power, you can use up to
12 NiMH cells or a 3S LiPo battery.

cnh 2/13/09

Parts Compatibility
‐ Mailing Address ‐
‐ Additional Contact Information ‐