This is the ElectriFly 3A BEC for 2S - 6S LiPo Batteries.

FEATURES: Designed to power the receiver in a model airplane in two different
            configurations-
           Primary intended use is as a 3 amp voltage regulator by plugging the
            receiver LiPo battery into the Deans connector on the BEC and then
            into the battery channel on receiver
           Can also be used in a three-way connection with the ESC/LiPo to
            eliminate the need to add a battery for the receiver, Parallel
            Deans Connector required (GPMM3141)
          5V or 6V selector allows use of smaller servos limited to 5V
          180 day limited warranty, USA and Canada only

INCLUDES: ElectriFly 3A BEC (battery eliminator circuit) for 2S-6S LiPo
            Batteries, universal receiver connector, Deans Male Ultra input
            connector and instructions

REQUIRES: Connecting between receiver and battery following instruction sheet

SPECS:    Battery Type: 2 - 6S LiPo (7.4V - 22.2V)
          6 - 18C NiMH/NiCd (7.2V - 21.6V)
          Max Constant Current: 3 amps
          Selectable Output Voltage: 5 - 6V
          Weight: 0.28oz (8g)

                                                                   jxs 01/16/09
                                                                         ir/jxs