Axial 1/8 Yeti XL Monster Buggy 4WD Kit

Tower Stock# AXIC9038  •  Manufacturer Stock# AX90038
Axial 1/8 Yeti XL Monster Buggy 4WD Kit (large view)
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Notes from our tech department:
This is the Radio Controlled, Electric Powered, 1/8 scale
4WD Yeti XL Rock Racer Kit from Axial.


Chassis: Composite plastic with integrated upper and lower aluminum
braces for greater stiffness, multiple upper link positions to
adjust anti-squat
Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear
driveshaft with captured cross pin design-no set screws to lose
front CVJ metal universals, adjustable steel turnbuckles
Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual
rate springs
Steering: Dual shear rack
Transmission: All metal gears, full ball bearings, single speed with
high gear installed, optional two-speed transmission component sold
Slipper Clutch: Dual slipper design with aluminum pad on each side of
32P spur gear for right amount of slip, and heat resistance
Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
Receiver Box: Waterproof, with three silicone seals (electronics not
Weight Box: Black plastic, styled to resemble a scale fuel cell, may
be used as an additional electronics box
Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30
Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm)
diameter, 17mm hexes
Front Suspension: Independent, maintains high-speed stability and
travel direction when encountering the roughest of terrain
Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm),
3mm aluminum lower link plates
Body: Clear polycarbonate .040" (1mm) thick, with interior tray,
three driver helmets, decals, spare wheel and tire


4WD Yeti XL Rock Racer Kit with Body, Tires, Wheels, Shocks, Decals
3 Driver Helmets, Interior Tray, Spare Wheel and Tire, and
Instruction Manual


Radio: 2-channel
Steering Servo: Metal gear, high-torque
Power System: 1/8 scale brushless 4-pole
Batteries: Two 2S or 3S LiPo Packs with connector to match ESC, 25C
minimum discharge rating
Battery Charger: To match selected batteries
AA Batteries: Four for transmitter
LiPo charge bag, maintenance and trail equipment


Length: 25.75" (654mm)
Width: 16.3" (414mm)
Height: 11.10" (282mm)
Wheelbase: 18.5" (470mm)
Ground Clearance: 2.48" (63mm)
Weight: 12.75" (5.78kg) including electronics
Length: 23.5" (597mm)
Width: 9.7" (247mm)
Height: 6.8" (173mm)
Thickness: .040" (1.02mm)
Battery Tray Dimensions;
Length: 6.89" (175mm)
Height: 1.3" (33mm)
Width: 1.7" (43mm)


Qty. Size Location Qty. Bearing Set
2 10x16mm Front Diff 1 ASCC9832
2 10x16mm Rear Diff 1 ASCC9832
2 15x21mm Front Uprights 1 DTXC1601
2 8x16mm Front Uprights 1 DTXC1585
2 15x21mm Front Bulkhead 1 DTXC1601
2 15x21mm Rear Bulkhead 1 DTXC1601
2 8x16mm Rear Axle 1 DTXC1585
2 5x11mm Transmission 1 DTXC1547
2 8x16mm Transmission 1 DTXC1585

jxs 01/14/15

See Tower Catalog page 85.
Easy RC: Cars & Trucks
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐