This is the glow powered, 2.4GHz radio controlled,
ready to run, 1/10 scale Tomahawk ST Racing Truggy
with Yellow and Blue Body from Thunder Tiger.
FEATURES: Chassis: Anodized aluminum alloy 0.12" (3mm) thick
Drive: Four wheel shaft drive
Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018), glow
plug and foam air filter
Exhaust: Aluminum tuned pipe, polished natural finish
Radio: 2-channel 2.4GHz IFHSS with standard size and
torque steering servo, transmitter has charge jack
Fuel Tank: 2.5oz (75cc)
Differentials: Bevel gear
Transmission: Single speed
Brake: Fiberglass disc
Clutch: Two shoe composite
Clutch Bell: 14 tooth steel
Spur Gear: 45 tooth composite
Steering: Ball bearing equipped bellcrank type with servo saver
Shocks: Composite body, oil filled
Body: Painted and trimmed
Wheels: Black plastic split spoke 14mm hex 2" (50mm) wide, 2.2"
(56mm) diameter
Tires: Small block patterns 3.93" (100mm) diameter, 2.08" (53mm)
wide with foam inserts
Ball Bearings: Installed on axles
Suspension: Double wishbone with ultra long racing suspension arms
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable front and rear, camber refers to the angle
of the tops of the tires from vertical when viewed from front or
behind vehicle
Warranty: Thunder Tiger guarantees this truck to be free from defects
in both material and workmanship. This warranty does not cover any
components damaged by use or modification. A part or parts missing
from the kit must be reported within 60 days of purchase. No part
or parts will be sent under warranty without proof of purchase
INCLUDES: RTR 1/10 scale Tomahawk ST Truggy with .18 cu in engine, 2.4GHz radio
tuned pipe, painted body with wing, instruction manual, tires,
wheels, foam inserts and instruction manual
REQUIRES: Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend
lubricant recommended (do not use more than 10% nitro content for
break-in)
AA Batteries: 12, 8 for transmitter 4 for battery box
Building and track equipment
SPECS: Vehicle;
Length: 17.71" (450mm)
Width: 12.9" (330mm)
Height: 5.9" (150mm)
Wheelbase: 11.61" (295mm)
Weight: 4.48lbs (2030g) approximately
Body;
Length: 14.4" (366mm)
Width: 6.5" (165mm)
Height: 3.9" (100mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x14mm Fr Diff 1 DTXC1583
2 8x14mm Rear Diff 1 DTXC1583
2 8x14mm Spur Gear Shaft 1 DTXC1583
4 10x15mm Front Axle 2 DTXC1595
4 10x15mm Rear Axle 2 DTXC1595
4 5x8mm Steering Bellcrank 2 DTXC1523
2 5x10mm Clutch 1 DTXC1535
jxs 12/22/10
ir/jxs
|