This is a Radio Controlled,fiberglass and wood,
Dynaflite Bird of Time ARF, Unlimited 3-Meter Sailplane
For Beginner to Intermediate Modeler/Fliers.
FEATURES: Wings: Built up wood, disassembles quickly into three manageable
sections for easy transport.
Fuselage: Hand laid fiberglass construction
Radio compartment: Ample room for full or micro size receiver, room
for a ballast box for increased wind penetration if desired.
Dedicated upper antenna tube.
Canopy: Dark tinted plastic canopy
Covering:The fuselage is gel coated in White with a Red pin stripe.
The main wing is covered with MonoKote White and Orange
Tow hook: Adjustable position to maximize launch angles and altitudes
Hardware: Complete hardware package for the plane
Assembly time: 2-3 hours
Warranty: Dynaflite Model Manufacturing Company guarantees this ARF
to be free from defects in both materials and workmanship at date
INCLUDES: Prebuilt sailplane, installed pushrod guides, pushrods,
complete hardware package, dark tinted canopy, decal sheet,
REQUIRES: Radio: 2 Channel
Servos: 1 Micro/Mini Servo, 1 Standard Servo
24"-30" (610-765mm) Servo extension wire
Receiver battery pack with at least 500mAh capacity
Misc. items: ¼" foam rubber padding, high start, glue, building and
.050" hex wrench (GPMR8000)
SPECS: Wingspan: 118" (3000mm)
Wing Area: 1050 sq in (67.73 sq dm)
Weight: 3.75lbs (1700g)
Wing Loading: 8.2 oz/sq ft (25 g/sq dm)
Length: 50" (1270mm)
Airfoil: Semi-symmetrical high wing
Center of Gravity: 3¾" (95mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Elevator: Up & Down 3/8" (9mm) 9/16" (15mm)
Rudder: Right & Left ¾" (19mm) 1½" (38mm)
COMMENTS: The 4" pushrod is not required
The MonoKote used is White (TOPQ0204) and Orange (TOPQ0202)
The Dynaflite Bird of Time ARF & kit versions do not have spoilers