Hacker-Model Cool Master Sport Trainer EP ARF 65"

Tower Stock# L33003  •  Manufacturer Stock# HKPA2020
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**
This is the Radio Controlled, Electric Powered, Almost Ready to Fly
Cool Master Trainer from Hacker-Model.


Construction: EPP foam and plywood
Wing: Two-piece
Landing Gear: Main, one-piece prebent aluminum with --" (-mm)
diameter wheels, tail, prebent steel wire with --" (--mm) wheel_

Spinner: Black plastic, 1.7" (44mm) diameter


Wing, Fuselage and Tail Sections, Landing Gear, Wheels, Spinner,
Hardware and Instruction Manual


Radio: At least 5 channels
Servos: Six mini with at least 15oz (1.7-2.0kg/cm) torque (2-ailerons
2-flaps, 1-rudder, 1-elevator
24" Servo Extensions: Two for rudder & elevator
12" Servo Extensions: Two for ailerons
Y-Harness: To connect flap servos to receiver
Motor: 850-1200Kv brushless
Electronic Speed Control: To match selected motor
Battery: 3S LiPo at least 3300mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, building and field equipment


Wingspan: 65" (1650mm)
Length: 44.9" (1140mm)
Weight: 4.4lbs (1.99kg)
Configuration: High-wing
Center of Gravity (CG): 3.9" (100mm) back from leading edge of wing
measured at the fuselage
Control Throws;
Ailerons, up & down: 1.8" (45mm)
Elevator, up & down: 0.98" (25mm)
Rudder, right & left: 1.2" (30mm)
Flaps: Fully down

jxs 01/04/17

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐