Phoenix Model 1/4 Tiger Moth 30cc-35cc GP/EP ARF 89.4"

$20 Gift Certificate and Folding Knife
Tower Stock# LWL177  •  Manufacturer Stock# PH142
Phoenix Model 1/4 Tiger Moth 30cc-35cc GP/EP ARF 89.4
Easy Pay
Request 3 Payments of $163.33 Details
Money Saving Combos
 
LZ2481
 
LZ2482
Notes from our tech department:
This is the Radio Controlled, Electric, or Gasoline Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Tiger Moth Airplane.
For Intermediate Modeler/Fliers.

FEATURES

Construction: Laser cut balsa and light plywood
Wings: Removable for easy transportation, rigging wire and wing
struts for added realism
Aileron and Flap Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Landing Gear:

Wheels: Two --" (--mm) foam main, one --" (--mm) tail wheel
Fuel Tank: Approximately 16oz (473cc)
Motor Mount: Three plywood plates with aluminum standoffs
Engine Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty

INCLUDES

ARF Tiger Moth 30cc Airplane with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Decals, scale Wire Rigging, Instruction
Manual

REQUIREMENTS

For Gasoline Operation;
Engine: 30cc 2/stroke

For Electric Operation;
Brushless Motor: Rimfire 1.60
ESC: 120-160A
LiPo Battery: 12S up to 5000 - 6000mAh (not carried)
LiPo Charger: To match selected battery
Propeller: 18x8 E APC

Radio: 6-channel
Servos: Six standard high-torque (2-aileron; 2-elevator; 1-rudder
1-throttle if using gasoline engine)
Y-Harness: For ailerons
Receiver Battery: 4.8-6V NiMH, at least 1200mAh
Misc. Items: 1/4" foam rubber padding, medium fuel tubing, spinner,
propeller, building and field equipment.

SPECIFICATIONS

Wingspan: 89.4" (2270mm)
Weight: 18.5 - 19.6lb (8.4 - 8.9kg)
Length: 73.6" (1870m)
Wing Area: 2387 sq in (154 sq dm)
Wing Loading: 22.61 oz sq/in (69 sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 7.5" (190mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.47" (12mm) 12% expo 0.79" (20mm) 10% expo
Rudder: 1.4" (35mm) 15% expo 1.8" (45mm) 15% expo
Ailerons: 0.59" (15mm) 10% expo 0.79" (20mm) 10% expo

COMMENTS

If a replacement fuel tank is needed the DuBro 16oz Fuel Tank,
DUBQ0216 can be used. Some trimming and modification may be
required when installing aftermarket fuel tank.

jxs 01/07/16

Resources
See Tower Catalog page 33.
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐