Phoenix Model Extra 330SC 30cc-35cc GP/EP ARF 72.8"

Tower Stock# PMMA1760  •  Manufacturer Stock# PH153
Phoenix Model Extra 330SC 30cc-35cc GP/EP ARF 72.8
Shipping Note:Details
Notes from our tech department:
This is the Radio Controlled, 30-35cc Gasoline or Electric Powered,
Almost Ready to Fly Phoenix Model Extra 330SC 3D Aerobatic Airplane.
For Intermediate Pilots.

**Additional Technical Info Will Be Added When It Becomes Available.**


Construction: Laser cut balsa and plywood
Wing: Bolt-on two piece
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Landing Gear: Aluminum main gear, spring wire for tail gear
Canopy: Clear molded plastic, painted pilot figure
Cowl: Painted fiberglass
Fuel Tank:
Spinner: 3.7" (95mm) diameter red plastic
Warranty Period: 90 day limited warranty


Prebuilt Wing, Fuselage and Tail sections with Landing Gear, Wheels,
Fuel Tank, Spinner, Pilot Figure and Instruction Manual


Radio: 8-channel minimum
Servos: Eight standard size, high-torque 2 aileron; 2 elevator;
1 rudder; 1 throttle (if using glow engine)
Gasoline Power;
Engine: 30-35cc
Receiver Battery: 3000-4000mAh
2-cycle oil
Electric Power;
Motor: Brushless outrunner
LiPo Battery: 12 cell (5000-6000mAh)
Electronic Speed Control: 120-160A/HV
Battery charger

Prop for glow engine or motor, field and maintenance equipment


Wingspan: 72.8" (1850mm)
Length: 70.3" (1786mm)
Flying Weight: 13.7 - 14.3lbs (6200 - 6500g)
Wing Area: 989 sq in (63.8 sq dm)
Wing Loading: 31.79 oz/sq ft (97g/sq dm)
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Wing Type: Naca airfoils
Center of Gravity (CG): 5.7" (145mm) back from the leading edge of
the wing measured at the fuselage
Control Throws; Low Rate High Rate
Ailerons up/down 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo
Elevator up/down 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder right/left 1.4" (35mm) 15% expo 2.4" (60mm) 15% expo

jxs 04/05/16

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐