Phoenix Model Spitfire 20cc-30cc GP/EP ARF 70.8"

Tower Stock# PMMA1780  •  Manufacturer Stock# PH151
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
Money Saving Combos
 
LZ1146
 
LZ1147
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Phoenix Model Radio Controlled 20-30cc Glow or Electric Powered
1/6 scale Almost Ready to Fly Spitfire Airplane.
For Intermediate Pilots.

FEATURES

Construction: Balsa and ply
Wing: One-piece, with ailerons and flaps, 21.5" (546mm) long,
1.26" (32.1mm) diameter aluminum joiner tube
Cowl: Painted fiberglass
Covering: High quality heat shrink covering
Landing Gear: Retracts with CNC machined metal struts, spring tail
gear
Wheels: 3.25" (82.5mm) main, 1.25" (32mm) tailwheel
Spinner: Red plastic 3.7" (95mm) diameter
Top Hatch: Removes for easy access to battery and radio equipment
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank: Approximately 14oz (420cc)
Warranty Period: 90 day limited warranty

INCLUDES

Prebuilt Wing, Fuselage and Tail Assemblies, Retracts, Main Wheels
Tailwheel, Spinner, Engine Mount, Motor Mount, Instruction Manual,
Fuel Tank, Decal Sheet

REQUIREMENTS

Gasoline Power;
Engine: 30cc
2-cycle oil, ignition battery

Electric Power;
Brushless Motor: Great Planes Rimfire 1.20 recommended
ESC: 80A if using the Rimfire 1.20 motor listed above
LiPo Battery: 5-6 cells, 5500 - 6000mAh
Charger, charging bag

Propeller: Compatible with selected engine or motor
Radio: 6-channel minimum
Servos: 7 standard size, high-torque, 2-aileron; 2-flap; 1-elevator
1-rudder; 1 throttle (if using gas engine)
Retract Gear Servos: Two, Futaba S3170G recommended
Receiver Battery: 4.8-6V / 2000mAh NiMH
Field and maintenance equipment

SPECIFICATIONS

Wingspan: 70.8" (1800mm)
Length: 61.9" (1572mm)
Flying Weight: 12.8-13.7lbs (5.8-6.2g)
Wing Area: 5.7 sq ft (53.4 sq dm)
Wing Loading: 35.4oz/sq ft (108g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21mm x 42mm)
Center of Gravity (CG): 4.7" (120mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.43" (11mm) 12% expo 0.51" (13mm) 10% expo
Elevator, up/down: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
Flap, Mid 0.59" (15mm) down, Landing 0.79" (20mm) down

COMMENTS

If a replacement fuel tank is needed the DuBro 14oz Fuel Tank
DUBQ0214 can be used. Some trimming and modification may be
required when installing aftermarket fuel tank.

jxs 07/13/16
ir/jxs

Resources
See Tower Catalog page 33.
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐