HoBao Racing 1/8 Hyper MT Sport Plus Nitro RTR Gray

Tower Stock# L33515  •  Manufacturer Stock# HB-MT-C30DG
  • front/side (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the HoBao Glow Powered, Radio Controlled, 1/8 scale,
Ready to Run Hyper MT Sport Plus Monster Truck with Gray Body.

FEATURES

Chassis: Aluminum, monocoque design
Drive: Four wheel shaft
Transmission: Heavy duty 2-speed, fully adjustable
Differentials: Front, center and rear with steel gears
Engine: Hobao Hyper 30 with slide valve carb, Hobao T5 turb
platinum glow plug, and large plastic pull-start handle, two-stage
foam air filter
Exhaust: Aluminum tuned pipe with polished natural finish
Radio: HoBao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, high output digital steering and throttle servos
Servos: HoBao HB 5514 waterproof, metal gear, ball bearing equipped
digital servos, 194oz-in (14kg-cm) torque
Suspension: Front and rear lower composite suspension arms, front and
rear stabilizer bars
Shocks: Oil=filled aluminum body super stroke
Shock Towers: Composite plastic
Fuel Tank: 8.4oz (250cc)
Clutch: Three shoe composite, 14 tooth steel clutch bell
Spur Gear: 32 tooth steel
Tires: Off-road, rubber construction with foam inserts 7.2" (182mm)
diameter, 3.8" (96mm) wide
Wheels: Six spoke, gray in color, 17mm hex
Body: Trimmed and painted in gray with red, black, white and yellow
color scheme
Brake: Dual disc
Ball Bearings: Full set, rubber sealed
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle

INCLUDES

RTR Hyper MT Sport Plus Monster Truck with .30 cu in (4.9cc) Engine,
3-ch Radio, Steering and Throttle Servos, Decal Sheet, printed
Body, Air Filter and Instruction Manual

REQUIREMENTS

AA Batteries: Twelve, 8 for radio, 4 for receiver
Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 22" (560mm)
Width: 18.5" (470mm)
Height: 10.2" (260mm)
Wheelbase:
Weight: 10.9lbs (4960g)

Body;
Length: 19.4" (492mm)
Width: 7.3" (185mm) at widest point
Height: 5.3" (134mm)

Carburetor Needle Settings;
Factory Default After Break-In
Top End (high speed): 3 turns out 2-1/2 turns out
Bottom End (low speed) 1/4 turn out flush w/ball collar
Mid Range: Flush-do not touch Flush-do not touch
Idle Screw 1mm (1/16" ) 1mm (1/16" )

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Steering Knuckles 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 6x13mm 2-Sp Gear 1 DTXC1573
4 8x16mm Rear Hubs 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535

jxs 12/20/16
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info