Associated 1/10 RC10B5M Factory Lite Kit

$15 Gift Certificate
Tower Stock# LW1104  •  Manufacturer Stock# 90000
  • front/side (see larger view)
  • top (see larger view)
Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled,
Team Associated RC10B5M Factory Lite Buggy Kit.

**Designed for classes that require Spec motors**
**and for track conditions where a lighter weight buggy is an advantage.**


Chassis: Lightened hard anodized aluminum with centralized mass and
mid-motor position for improved handling on high-grip offroad
tracks, chassis fits ROAR approved 2S saddle packs and 2S short
packs using optional foam insert
Drive: Rear wheel
Transmission: Three gear with lightweight aluminum V2 top shaft
Differential: 14 carbide ball type with lightweight outdrives
Body: B5 clear
Suspension: Heavy duty ball cups and studs for maximum travel with
reduced binding and friction
Steering: Full ball bearing with horizontal ball studs for finer
Ackermann adjustments, Ackermann describes the effect of the inner
front wheel turning faster that the outer front wheel during turns
Wheels Hexes: Front, lightweight aluminum axle/hex adapter
rear, aluminum clamping drive hexes with laser etching
Ball Bearings: Factory Team upgraded blue shield ball bearing kit
Shocks: Factory Team V2 12mm Big Bore hard anodized aluminum, 3mm
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Turnbuckles: Factory Team titanium, with heavy-duty lubricated ball


Associated RC10 B5M Factory Team off-road buggy kit, body with wing
decals, shock oil and instruction manual


Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Tires of racer's choice
Wheels: Front, 0.94" (24mm) wide, 2.4" (61mm) diameter, rear 1.5"
(38mm) wide, 2.4" (61mm) diameter, 12mm hex
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable motor and ESC for this vehicle.
Battery: 7.4V LiPo, or 6.6V LiFe (saddle, shorty, or square pack)
Battery Charger: To match selected battery
Building and track equipment


Length: 15.1" (385mm)
Wheelbase: 11.02 - 11.1" (280 - 282mm)

Length: 12.2" (310mm)
Width: 4.5" (114mm)
Height: 2.8" (71mm)


For Replacement Ball Bearings use
Qty. Size Location Qty. Bearing Set
4 3x7mm Steering 2 DTXC1506
4 5x10mm Front Uprights 2 DTXC1535
2 6x12mm Gearbox 1 DTXC1569
2 10x15mm Gearbox 1 DTXC1595
4 5x10mm Idler Gear 2 DTXC1535
2 10x15mm Rear Hubs 1 DTXC1595
2 6x13mm Rear Hubs 1 DTXC1573

jxs 01/30/15

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐