This is the 1/10 scale, radio controlled, electric powered, on-road
                TCX Touring Car Chassis Kit from Hot Bodies.

FEATURES: Chassis: Woven graphite 0.098" (2.5mm) thick, with one-piece fully
            symmetrical top deck that can be fine tuned for different track
            conditions
          Drive: Four wheel belt drive with aluminum driveshafts
          Motor Mount: Low profile aluminum moved 0.18" (4.5mm) closer to the
            centerline for improved balance
          Front Spool: Three-piece, central section machined from aluminum
            outdrives made of lightweight POM material and fitted with
            aluminum sleeves to prevent splitting under acceleration and
            braking
          Rear Differential: Constructed of lightweight POM plastic, ball type
            with twelve 3mm ceramic nitride balls
          Shocks: Oil-filled, hard anodized threaded shocks with single O-ring
            design and 0.14" (3.65mm) thick woven graphite shock towers
          Suspension: Reversible lower arms for extra shock positions, droop
            screws, turnbuckles, easily adjustable wheelbase, track width
            anti-squat and roll center, also includes 1.2mm, 1.3mm, 1.4mm sway
            bars
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering New twin crank design, aluminum steering rack floats on
            shielded ball bearings
          Ackerman: Adjustable, Ackerman refers to the effect of the inner
            front wheel turning faster than the outer front wheel during turns
          Spur Gear: Racing V2 type, 115 tooth, 64 pitch
          Bumper: Front foam

INCLUDES: 1/10 scale TCX Touring Car Chassis Kit, instruction manual, decal
            sheet, shock oil and diff lube

REQUIRES: Radio: 2-channel with high-speed steering servo
          Motor: 540 size
          Electronic Speed Control: To match selected motor
          Pinion Gear: 64 pitch (number of teeth to be determined by selected
            motor)
          Battery: 6-cell 7.2V NiMH stick pack, or 2S 7.4V stick LiPo pack
          Battery Charger: To match selected battery
          Tires: 26mm touring car type
          Wheels: 26mm touring car type
          Body: 1/10 scale touring car
          Building and track equipment

SPECS:    Length: 14.4" (365mm)
          Width: 7.5" (190mm)
          Wheelbase: 10.1 - 10.3" (258 - 262mm)
          Weight: 47.6oz (1350g) approximate, race-ready

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size         Location            Qty.   Bearing Set
             2   4x7mm         Spur Gear            1      DTXC1507
             2  10x15mm        Spool Diff           1      DTXC1595
             2   5x8mm         Ball Diff            1      DTXC1523
             2  10x15mm        Ball Diff            1      DTXC1595
             2   3x6mm flanged Bearing Holder       1      DTXC1505
             4   5x10mm        Fr Hubs              2      DTXC1535
             4   5x10mm        Rear Hubs            2      DTXC1535

                                                                   jxs 09/08/10