This is the LRP Pulsar Touch DC Powered Competition Charger,
               Discharger and Balancer from Team Associated.

FEATURES: Charges 1-4 cell LiPo/LiFePo with automatic (LiPo/LiFePo) cut-off,
            and 1-8 cells (NiMH/NiCd) with adjustable Delta-Peak detection,
            linear or optional 5-step charge mode, charges with variable
            current steps
          Integrated LiPo/LiFePo balancer
          Blue backlit touch-screen graphics display
          Intuitive program structure with graphical user interface, allows
            precise adjustment of all parameters
          Adjustable discharge current and cut-off voltage
          User Profile Memory, 5 factory pre-set profiles can be customized,
            re-named and saved in memory
          Receiver simulator port for checking speed controls and servos
          USB connection with wire for data download to PC and firmware update
          Brushless motor sensor port for sensor check and RPM measurement
          Protection against output reverse polarity, short circuit, input
            voltage error and over charge

INCLUDES: LRP Pulsar Touch Charger with DC Input Cable with 4mm Male Connectors
            USB Cable, Output Cable with 4mm Male Connectors and Alligator
            Clips, and Instruction Manual

REQUIRES: 12V power supply

SPECS:    Dimensions: 6.2 x 6.8 x 2.7" (158 x 172 x 68mm)
          Weight: 25.4oz (720g)
          DC Input Voltage: 11-15V
          Integrated LiPo Balancer: 2S - 4S
          Charging Mode: Linear, 4 step, LiPo LiFePo
          Charging Capacity: NiMH/NiCd 1-8 cell
                             LiPo LiFePo 1-4 cell
          Charge Current: 0.1 - 12A
          Trickle Current: 0 - 0.55A
          Delta Peak: 1-200mV
          Autostart Timer: 0-99 min.
          Storage Charge and Cycle Modes: Yes
          Discharge Current: 0.1 - 20.0A 35A pulse
          Discharge Cut-Off Voltage: NiMH/NiCd 0.1 -1.3V/cell
                                     LiPo/ LiFePo 2.0 - 4.2V/cell
          Internal Cooling Fans: Two
          Acoustic Signal: Buzzer
          Voltage Calibration Mode: Yes
          Multi Protection System: Yes
          DC Input Connection: 4mm connectors
          Output Connection: 4mm jacket with alligator clips

COMMENTS: For the Multi Balance Adapter, order ASCP2103

                                                                   jxs 10/15/10
                                                                         ir/jxs
                                                              updt jxs 02/06/13