This is the 1/10 scale electric powered, radio controlled,
             Associated Factory Team B44.1 4WD off-road Buggy kit.

FEATURES: Chassis: Revised LiPo specific 0.10" (2.5mm) thick carbon fiber
            chassis and top plate, chassis cut for additional ground clearance
            composite front bulkhead and rear chassis plate
          Drive: Four wheel shaft with CVA joints with pin retainer clips
          Diffs: Ball type with lightweight outdrives
          Bearings: Full set
          Shocks: Factory Team V2 aluminum threaded shocks with TiN gold shock
            shafts, bleed screw caps and blue Factory Team aluminum shock
            bushings
          Shock Oil: 30wt (ASCC8074) and 35wt (ASCC8080) silicone
          Shock Springs: Silver front (ASCC4402) and Green rear (ASCC4386)
          Shock Towers: 0.14" (3.5mm) thick woven carbon fiber
          Slipper Clutch: V2 assembly with high-rate spring for more consistent
            adjustments, dual sided externally adjustable
          Spur Gear: 48 pitch, 84 tooth nylon construction (ASCC9653)
          Motor Mount: Factory Team blue aluminum cam motor mount set
          Front Tires: Pro-Line M3 Holeshot 1.57" (40mm) wide, 2.2" (56mm)
            diameter (ASCC9769)
          Rear Tires: Pro-Line M3 Holeshot 1.53" (38mm) wide, 2.2" (56mm)
            diameter (ASCC9590)
          Front Wheels: 2.2" diameter, 1.03" (26mm) wide white dish (ASCC9767)
          Rear Wheels: 2.2" diameter, 1.5" (38mm) wide white dish (ASCC9589)
          Foam Inserts: Included for front and rear
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Turnbuckles: Factory Team blue anodized titanium turnbuckles
          Factory Team: Blue aluminum servo mounts, shock bushings, shock pivot
            balls, wheel spacers and more
          Body: Clear polycarbonate JConcepts Punisher with chassis undertray
            and 6.5" high downforce wing
          Steering: Ball bearing steering with adjustable servo saver

INCLUDES: One B44.1 4WD buggy kit with oil-filled shocks, clear body, tires,
            foam inserts, wheels, titanium turnbuckles, Factory Team parts,
            decals and photo-illustrated manual

REQUIRES: Radio: 2ch with one servo
          Radio Batteries: (8) AA size
          Pinion Gear: number of teeth to be determined by motor
          Motor: Brushless for best performance
          Electronic Speed Control: Compatible with selected motor
          Battery: 6-cell saddle configuration
          Charger: AC/DC charger timed or peak for 6-cell battery
          Building and track equipment

SPECS:      Vehicle;
          Length: 14.56" (370mm)
          Width:   9.84" (250mm)
          Wheelbase: 11" (276mm)
          Weight: 3.7lbs (1715g)
          Gear Ratio: 2.5:1
            Body;
          Length: 11.2" (285mm)
          Width:   5.4" (138mm)
          Height:  2.7" (69mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.   Size         Location                   Qty.  Bearing Set
             4   3/16x5/16"     Front and Rear Ball Diff    2      DTXC1413
             4   3/8x5/8"       Front and Rear Ball Diff    2      DTXC1437
             2   .187x.196"     Center Slipper              1      ASCC7935
             4   3/16x3/8"      Front and Rear Gearbox      2      DTXC1423
             2   .78x.250"      Steering Bellcrank          1      ASCC9746
             2   .125x.250"     Steering Bellcrank          1      ASCC9746
             4   3/16x3/8"      Front Steering Blocks       2      DTXC1423
             2   3/16x3/8"      Inner Rear Hub Carrier      1      DTXC1423
             2   3/16x1/2"      Outer Rear Hub Carrier      1      ASCC7935

                                                                   jxs 12/02/10
                                                                         ir/jxs