This is the electric powered, radio controlled, 1/10 scale
                Zahhak Off-Road Racing Buggy kit from Tamiya.

FEATURES: Chassis: Monocoque Bathtub type
          Drive: Rear wheel
          Gearbox: Sealed
          Differential: Ball type
          Suspension: Four wheel double wishbone independent suspension with
            long span arms and the same geometry as the Tamiya TRF201 buggy
          Shocks: Oil-filled CVA, with plastic bodies
          Wheels: White plastic dish-Front, 0.98" (25mm) wide
            Rear, 2.2" (39mm) wide, both, 2.2" (56mm) diameter
          Tires: Front, wide grooved rubber with foam inserts 1" (26mm) wide
            3.1" (78mm) diameter
            Rear, Dual block with foam inserts 1.9" (48mm) wide, 3.3" (84mm)
            diameter
          Body: Clear polycarbonate
          Spur Gear: 79 tooth composite
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
          Steering: Bell-crank with servo saver

INCLUDES: Tamiya Zahhak Off-Road Racing Buggy kit with Tires, Wheels, Foam
            Inserts, Clear Body, Decals and Instruction Manual

REQUIRES: Radio: 2-channel with standard size steering servo
          Electronic Speed Control: Compatible with selected motor
          AA Batteries: Eight for transmitter
          Motor: Tamiya Super Stock BZ (TAMC1430) recommended, Tamiya 540J
            and Sport-Tuned motors cannot be used
          Battery: NiCd or NiMH 6-cell stick with standard connector
          Battery Charger: Peak type recommended
          Pinion Gear: 20-25 tooth, 48 pitch

SPECS:      Vehicle-
          Length: 15"   (382mm)
          Width:   9.8" (249mm)
          Height:  5.3" (136mm)
          Weight: 2 lbs (910g) without motor, pinion gear, radio equipment or
            battery
            Body-
          Length:  10.25" (260mm)
          Width:    5.75" (146mm)
          Height:   2.25" (571mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                Qty    Bearing Set
             2   5x8mm     Ball Diff                 1       DTXC1523
             2  10x15mm    Ball Diff                 1       DTXC1595
             3   5x10mm    Idler Gear                2       DTXC1535
             1   4x8mm     Counter Gear              1       DTXC1511
             2   5x10mm    Front Hubs                1       DTXC1535
             2   5x10mm    Rear Hubs                 1       DTXC1535
             2   3x7mm     Steering                  1       DTXC1506

                                                                   jxs 02/17/11
                                                                         ir/jxs