This is the 1/12 scale brushless electric powered, 2.4GHz radio controlled,
    ready to run Sparrowhawk DT12 Short Course Truck from Thunder Tiger.

FEATURES: Chassis: Composite tub chassis with countersunk battery tray
          Drive: Four wheel shaft with front and rear universals
          Motor: Ripper 3900kV brushless with 20 tooth steel pinion gear
          Motor Mount: Cast aluminum with cooling fins
          Main Gear: 72 tooth composite
          Radio: Ace Cougar PS3i 2.4GHz three channel with standard steering
            servo
          ESC: Ace BLC-40C 40A amp
          Body: Painted and trimmed lexan with body trim decals
          Differentials: Hardened steel planetary gear type
          Shocks: Oil-filled, composite body
          Caster: Adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable front and rear, camber refers to the angle
            of the tops of the tires from vertical when viewed from front or
            behind vehicle
          Tires: 1.4" (35mm) wide, 3.4" (86mm) diameter with foam inserts
          Wheels: Seven spoke 1.2" (31.5mm) wide, 2.2" (57mm) diameter
          Warranty: Thunder Tiger guarantees this truck to be free from defects
            in both material and workmanship. This warranty does not cover any
            components damaged by use or modification. A part or parts missing
            from the kit must be reported within 60 days of purchase. No part
            or parts will be sent under warranty without proof of purchase

INCLUDES: 1/12 scale RTR Sparrowhawk DT12 Short Course Truck with brushless
            motor, 2.4GHz radio, ESC, 20T pinion gear, 72 tooth main gear
            painted body, decals and instruction manual

REQUIRES: AA Batteries: Eight for transmitter
          Battery: 7.2V 6-cell NiMH stick pack with Standard connector OR
            7.4V 2S LiPo pack
          Battery Charger: Compatible with selected battery
          Phillips screwdriver and track equipment

SPECS:      Vehicle-
          Length: 16.73" (425mm)
          Width: 9.84" (250mm)
          Height: 6.10" (155mm)
          Ground Clearance: 1" (25mm)
          Wheelbase: 10" (255mm)
          Weight: 49.38oz (1400g)
          Gear Ratio: 11.28:1
          Tread: Distance from center of tires side-to-side
                 Front, 8.97" (228mm), Rear, 8.85" (225mm)
            Body-
          Length: 17.5" (444mm)
          Width:   7.7" (197mm) behind front wheels, narrowest point
                   9.3" (236mm) at rear wheels, widest point
          Height:  4.5" (114mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty.  Bearing Set
             2   8x14mm    Fr Diff                     1     DTXC1583
             2   5x11mm    Fr Diff                     1     DTXC1547
             2   8x14mm    Rear Diff                   1     DTXC1583
             2   5x11mm    Rear Diff                   1     DTXC1547
             1   5x11mm    Main Gear Shaft             1     DTXC1547
             4   10x15mm   Rear Hub Carriers           2     DTXC1595
             4   10x15mm   Front Hub Carriers          2     DTXC1595

                                                                   jxs 05/19/11
                                                                         ir/jxs