This is the electric powered, 2.4GHz radio controlled, ready to run 1/18 scale
                    Associated RC18T2 Off-Road truck.

FEATURES: Chassis: Molded composite
          Drive: 4 wheel, two belt sealed drivetrain with adjustable slipper
            clutch
          Body: Painted and trimmed 0.03" (0.8mm) thick polycarbonate
          Radio: 3-channel Associated XP3-SS 2.4GHz with steering and throttle
            trims and throttle ATV, mini steering servo
          Battery: 6-Cell 1100mAh NiMH
          Battery Charger: 110V AC wall type mode
          Motor: Reedy 500kV brushless
          Electronic Speed Control: XPS micro with reverse, switchable to
            forward only for racing
          Shocks: Oil-filled composite bodies with adjustable pre-load
          Ball Bearings: Full set, 15 total
          Shocks: Composite body, oil-filled with adjustable pre-load
          Tires: Mini pin 2.2" (56mm) diameter, 1.1" (29mm) wide
          Wheels: Dish type 1.1" (28.1mm) wide, 1.3" (33.5mm) diameter, white
            in color
          Steering: Dual bellcrank
          Battery Strap: Nylon, hinged for quick battery changes
          Pinion Gear: 12 tooth steel
          Spur Gear: 60 tooth nylon
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Non-adjustable, camber refers to the angle of the
            tops of the tires from vertical when when viewed from front or
            behind vehicle

INCLUDES: RTR Associated RC18T2 Off-Road truck with 370 size motor, 3-ch 2.4GHz
            radio, NiMH battery, wall charger, ESC with reverse, painted body
            and instruction manual

REQUIRES: AA Batteries: 8 for transmitter
          Building and track equipment
SPECS:      Vehicle-
          Length:    9.9" (252mm)
          Width:     7.2" (182mm)
          Weight:    1.1lb (505g)
          Wheelbase: 6.6" (167mm)
          Gear Ratio: 2.0:1
            Body-
          Length:    8.8" (225mm)
          Width:     3.8" (98mm)
          Height:    2.6" (67mm)

COMMENTS: For replacement bearings use;
            Qty.        Size           Location       Qty.    Order
             2        8x12x3.5mm     Fr & R Diffs      1     ASCC0106
             1        4x8x3mm        Spur Gear         1     DTXC1511
             2        4x8x3mm        Caster Blocks     1     DTXC1511
             2        8x12mm         Caster Blocks     1     DTXC1581
             2        4x8x3mm        Rear Hubs         1     DTXC1511
             2        8x12mm         Rear Hubs         1     DTXC1581
             1        3x6mm          Gearbox           1     DTXC1503

                                                                   jxs 06/23/10
                                                                         ir/jxs